Diff for /tests/scripts/test017-syncreplication-refresh between versions 1.24.2.4 and 1.33.2.11

version 1.24.2.4, 2007/01/02 21:44:13 version 1.33.2.11, 2010/04/19 19:14:33
Line 1 Line 1
 #! /bin/sh  #! /bin/sh
 # $OpenLDAP: pkg/ldap/tests/scripts/test017-syncreplication-refresh,v 1.24.2.3 2006/01/03 22:16:29 kurt Exp $  # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.  ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##  ##
 ## Copyright 1998-2007 The OpenLDAP Foundation.  ## Copyright 1998-2010 The OpenLDAP Foundation.
 ## All rights reserved.  ## All rights reserved.
 ##  ##
 ## Redistribution and use in source and binary forms, with or without  ## Redistribution and use in source and binary forms, with or without
Line 25  mkdir -p $TESTDIR $DBDIR1 $DBDIR2 Line 25  mkdir -p $TESTDIR $DBDIR1 $DBDIR2
   
 #  #
 # Test replication:  # Test replication:
 # - start master  # - start producer
 # - start slave  # - start consumer
 # - populate over ldap  # - populate over ldap
 # - perform some modifies and deleted  # - perform some modifies and deleted
 # - attempt to modify the slave (referral)  # - attempt to modify the consumer (referral)
 # - retrieve database over ldap and compare against expected results  # - retrieve database over ldap and compare against expected results
 #  #
   
 echo "Starting master slapd on TCP/IP port $PORT1..."  echo "Starting producer slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $SRMASTERCONF > $CONF1  . $CONFFILTER $BACKEND $MONITORDB < $SRMASTERCONF > $CONF1
 $SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &  $SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
 PID=$!  PID=$!
Line 45  KILLPIDS="$PID" Line 45  KILLPIDS="$PID"
   
 sleep 1  sleep 1
   
 echo "Using ldapsearch to check that master slapd is running..."  echo "Using ldapsearch to check that producer slapd is running..."
 for i in 0 1 2 3 4 5; do  for i in 0 1 2 3 4 5; do
         $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \          $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \
                 'objectclass=*' > /dev/null 2>&1                  'objectclass=*' > /dev/null 2>&1
Line 63  if test $RC != 0 ; then Line 63  if test $RC != 0 ; then
         exit $RC          exit $RC
 fi  fi
   
 echo "Using ldapadd to create the context prefix entry in the master..."  echo "Using ldapadd to create the context prefix entry in the producer..."
 $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \  $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \
         $LDIFORDEREDCP > /dev/null 2>&1          $LDIFORDEREDCP > /dev/null 2>&1
 RC=$?  RC=$?
Line 73  if test $RC != 0 ; then Line 73  if test $RC != 0 ; then
         exit $RC          exit $RC
 fi  fi
   
 echo "Starting slave slapd on TCP/IP port $PORT2..."  echo "Starting consumer slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $R1SRSLAVECONF > $CONF2  . $CONFFILTER $BACKEND $MONITORDB < $R1SRSLAVECONF > $CONF2
 $SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &  $SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
 SLAVEPID=$!  SLAVEPID=$!
Line 85  KILLPIDS="$KILLPIDS $SLAVEPID" Line 85  KILLPIDS="$KILLPIDS $SLAVEPID"
   
 sleep 1  sleep 1
   
 echo "Using ldapsearch to check that slave slapd is running..."  echo "Using ldapsearch to check that consumer slapd is running..."
 for i in 0 1 2 3 4 5; do  for i in 0 1 2 3 4 5; do
         $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \          $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \
                 'objectclass=*' > /dev/null 2>&1                  'objectclass=*' > /dev/null 2>&1
Line 103  if test $RC != 0 ; then Line 103  if test $RC != 0 ; then
         exit $RC          exit $RC
 fi  fi
   
 echo "Using ldapadd to populate the master directory..."  echo "Using ldapadd to populate the producer directory..."
 $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \  $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \
         $LDIFORDEREDNOCP > /dev/null 2>&1          $LDIFORDEREDNOCP > /dev/null 2>&1
 RC=$?  RC=$?
Line 113  if test $RC != 0 ; then Line 113  if test $RC != 0 ; then
         exit $RC          exit $RC
 fi  fi
   
 echo "Waiting 15 seconds for syncrepl to receive changes..."  echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
 sleep 15  sleep $SLEEP1
   
 echo "Using ldapmodify to modify master directory..."  echo "Using ldapmodify to modify producer directory..."
   
 #  #
 # Do some modifications  # Do some modifications
Line 193  newsuperior: ou=Retired, ou=People, dc=e Line 193  newsuperior: ou=Retired, ou=People, dc=e
 dn: cn=James A Jones 2, ou=Information Technology Division, ou=People, dc=example,dc=com  dn: cn=James A Jones 2, ou=Information Technology Division, ou=People, dc=example,dc=com
 changetype: delete  changetype: delete
   
   dn: dc=testdomain1,dc=example,dc=com
   changetype: modrdn
   newrdn: dc=itsdomain1
   deleteoldrdn: 1
   
   dn: dc=itsdomain1,dc=example,dc=com
   changetype: modify
   replace: description
   description: Example, Inc. ITS test domain
   
   EOMODS
   
   RC=$?
   if test $RC != 0 ; then
           echo "ldapmodify failed ($RC)!"
           test $KILLSERVERS != no && kill -HUP $KILLPIDS
           exit $RC
   fi
   
   echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
   sleep $SLEEP1
   
   echo "Performing modrdn alone on the producer..."
   $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD > \
           $TESTOUT 2>&1 << EOMODS
   dn: dc=testdomain2,dc=example,dc=com
   changetype: modrdn
   newrdn: dc=itsdomain2
   deleteoldrdn: 1
   
   EOMODS
   
   RC=$?
   if test $RC != 0 ; then
           echo "ldapmodify failed ($RC)!"
           test $KILLSERVERS != no && kill -HUP $KILLPIDS
           exit $RC
   fi
   
   echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
   sleep $SLEEP1
   
   echo "Performing modify alone on the producer..."
   $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD > \
           $TESTOUT 2>&1 << EOMODS
   dn: dc=itsdomain2,dc=example,dc=com
   changetype: modify
   replace: description
   description: Example, Inc. itsdomain2 test domain
   
   EOMODS
   
   RC=$?
   if test $RC != 0 ; then
           echo "ldapmodify failed ($RC)!"
           test $KILLSERVERS != no && kill -HUP $KILLPIDS
           exit $RC
   fi
   
   echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
   sleep $SLEEP1
   
   echo "Performing larger modify on the producer..."
   $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD > \
           $TESTOUT 2>&1 << EOMODS
   dn: cn=Alumni Assoc Staff,ou=Groups,dc=example,dc=com
   changetype: modify
   replace: objectClass
   objectClass: groupOfNames
   -
   replace: cn
   cn: Alumni Assoc Staff
   -
   replace: description
   description: blablabla
   -
   replace: member
   member: cn=Manager,dc=example,dc=com
   member: cn=Dorothy Stevens,ou=Alumni Association,ou=People,dc=example,dc=com
   member: cn=James A Jones 1,ou=Alumni Association,ou=People,dc=example,dc=com
   member: cn=Jane Doe,ou=Alumni Association,ou=People,dc=example,dc=com
   member: cn=Jennifer Smith,ou=Alumni Association,ou=People,dc=example,dc=com
   member: cn=Mark Elliot,ou=Alumni Association,ou=People,dc=example,dc=com
   member: cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com
   
 EOMODS  EOMODS
   
 RC=$?  RC=$?
Line 202  if test $RC != 0 ; then Line 287  if test $RC != 0 ; then
         exit $RC          exit $RC
 fi  fi
   
 echo "Waiting 15 seconds for syncrepl to receive changes..."  echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
 sleep 15  sleep $SLEEP1
   
 echo "Try updating the slave slapd..."  echo "Try updating the consumer slapd..."
 $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT2 -w $PASSWD > \  $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT2 -w $PASSWD > \
         $TESTOUT 2>&1 << EOMODS          $TESTOUT 2>&1 << EOMODS
 dn: cn=James A Jones 1, ou=Alumni Association, ou=People, dc=example, dc=com  dn: cn=James A Jones 1, ou=Alumni Association, ou=People, dc=example, dc=com
Line 220  RC=$? Line 305  RC=$?
   
 # expect 10 (LDAP_REFERRAL)...  # expect 10 (LDAP_REFERRAL)...
 if test $RC != 10 ; then  if test $RC != 10 ; then
         echo "ldapmodify should have failed ($RC)!"          echo "ldapmodify should have returned referral ($RC)!"
         test $KILLSERVERS != no && kill -HUP $KILLPIDS          test $KILLSERVERS != no && kill -HUP $KILLPIDS
         exit $RC          exit 1
 fi  fi
   
 echo "Using ldapsearch to read all the entries from the master..."  OPATTRS="entryUUID creatorsName createTimestamp modifiersName modifyTimestamp"
   
   echo "Using ldapsearch to read all the entries from the producer..."
 $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT1 \  $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT1 \
         'objectclass=*' > $MASTEROUT 2>&1          '(objectclass=*)' '*' $OPATTRS > $MASTEROUT 2>&1
 RC=$?  RC=$?
   
 if test $RC != 0 ; then  if test $RC != 0 ; then
         echo "ldapsearch failed at master ($RC)!"          echo "ldapsearch failed at producer ($RC)!"
         test $KILLSERVERS != no && kill -HUP $KILLPIDS          test $KILLSERVERS != no && kill -HUP $KILLPIDS
         exit $RC          exit $RC
 fi  fi
   
 echo "Using ldapsearch to read all the entries from the slave..."  echo "Using ldapsearch to read all the entries from the consumer..."
 $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT2 \  $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT2 \
         'objectclass=*' > $SLAVEOUT 2>&1          '(objectclass=*)' '*' $OPATTRS > $SLAVEOUT 2>&1
 RC=$?  RC=$?
   
 if test $RC != 0 ; then  if test $RC != 0 ; then
         echo "ldapsearch failed at slave ($RC)!"          echo "ldapsearch failed at consumer ($RC)!"
         test $KILLSERVERS != no && kill -HUP $KILLPIDS          test $KILLSERVERS != no && kill -HUP $KILLPIDS
         exit $RC          exit $RC
 fi  fi
   
 test $KILLSERVERS != no && kill -HUP $KILLPIDS  test $KILLSERVERS != no && kill -HUP $KILLPIDS
   
 echo "Filtering master results..."  echo "Filtering producer results..."
 . $LDIFFILTER < $MASTEROUT > $MASTERFLT  $LDIFFILTER < $MASTEROUT > $MASTERFLT
 echo "Filtering slave results..."  echo "Filtering consumer results..."
 . $LDIFFILTER < $SLAVEOUT > $SLAVEFLT  $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
   
 echo "Comparing retrieved entries from master and slave..."  echo "Comparing retrieved entries from producer and consumer..."
 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT  $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
   
 if test $? != 0 ; then  if test $? != 0 ; then
         echo "test failed - master and slave databases differ"          echo "test failed - producer and consumer databases differ"
         exit 1          exit 1
 fi  fi
   
 echo ">>>>> Test succeeded"  echo ">>>>> Test succeeded"
   
   test $KILLSERVERS != no && wait
   
 exit 0  exit 0

Removed from v.1.24.2.4  
changed lines
  Added in v.1.33.2.11


______________
© Copyright 1998-2020, OpenLDAP Foundation, info@OpenLDAP.org