[Date Prev][Date Next]
Re: Need Help On Master-Master Replication Setup!!
Yes, you do.
Subect : vip/lb
Subjectaltnames : server1, server2, etc, vip/lb
Clients will 'use' the vip/lb name (including slaves); the servers will use server names for syncing.
Chris Jacobs, Systems Administrator, Technology Services Group
Apollo Group | Apollo Marketing and Product Development | Aptimus, Inc.
2001 6th Ave | Suite 3200 | Seattle, WA 98121
direct 206.839.8245 | cell 206.601.3256 | fax 206.839.8106
From: openldap-technical-bounces@OpenLDAP.org <openldap-technical-bounces@OpenLDAP.org>
To: email@example.com <firstname.lastname@example.org>
Cc: email@example.com <firstname.lastname@example.org>
Sent: Sun Sep 11 12:28:20 2011
Subject: Re: Need Help On Master-Master Replication Setup!!
So i dont need to put the FQDN of the LB in the cert, right ?
Please correct me if am wrong, My client will point to the FQDN/IP of the LB which will internally distribute the traffic across the
3 backend LDAP servers, I was just confused whether to keep the LB FQDN in the cert.
On Sun, Sep 11, 2011 at 9:09 PM, Daniel Qian
The three servers in the LB pool can share one certificate. When you create the CSR for the certificate, you can specify ldapserver1, ldapserver2 & ldapserver3 for the subjectAltName field. Google with "subjectAltName"
you should be able to find a lot of information how to do that.
On 11-09-11 2:48 PM, pradyumna dash wrote:
Please suggest !!
On Fri, Sep 9, 2011 at 11:15 PM, pradyumna dash
This is the setup I would like to have.
| __________LoadBalancer1_________ |
| | |
ldapserver1 ldapserver2 ldapserver3
My challange is I never did this kind of architecture before, So would like to know from LB prosepctive, How to configure it like
say i have to create a DNS FQDN e.g "ldapserver.example.com" and then use this as a floating IP/hostname for the 3 ldapservers
in the backend? or whats should be done? The network team will do the setup but i need to tell them what to do. My next question
would be i would like to configure LDAPS, so how to create the certificate i mean what to provide in common name or how to create a
certificate which can be shared across the servers, am using "openssl" ? I am using SLES 11(SP1) and the setup wiould be a Multi-Master
On Fri, Sep 9, 2011 at 8:14 PM, pradyumna dash
Thanks for the suggestion, but i never did it before , if you can share a doc or something would be great.
I use the openssl to generate the certificate, so even i dont know how to configure subjectAltNames. Also if you can explain a bit how i should i proceed would be appreciated.
So in the load balancer what to configure and how to create the certificate.
On Fri, Sep 9, 2011 at 7:35 PM, Quanah Gibson-Mount
I would suggest a cert for ldap1 and ldap2, both with having subjectAltNames for a load balanced name too, so clients can work directly to the servers and directly with the LB name.
--On Thursday, September 08, 2011 10:17 PM +0200 pradyumna dash <email@example.com
I would like to setup OpenLDAP Mater-Master replication, before that i
would like to know something more about it, because i
never implemented the same.
Suppose i have 2 servers ldap1.example.com and ldap2.example.com
I will configure M-M replication with LDAPS, in this scenario how my
architecture should be? Do i need to keep it behind the loadbalancer or
what are the steps to do it?
How come the client will come to know if any of the server is down, it
will talk to the other server, because in my ldap.conf file i will have a
single URI/host entry
pointing to one of the server and also how to create the certificate, do
i need 2 individiual certificate 1 for ldap1 and 1 for ldap2?
Sr. Member of Technical Staff
A Division of VMware, Inc.
Zimbra :: the leader in open source messaging and collaboration
This message is private and confidential. If you have received it in error, please notify the sender and remove it from your system.