[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: olcDbConfig: value #14 provided more than once

Hy Matthew,


I am not sure if this as anything to do with your problem, but there is a "l" missingin your olSyncrepl configuration :)


olcSyncrepl: {0}rid=001 provider=dap://rock.earlham.edu/
binddn="<snip>" bindmethod=simple credentials=<snip>
searchbase="cn=config" type=refreshAndPersist retry="5 5 300
5" timeout=1


should be


olcSyncrepl: {0}rid=001 provider=ldap://rock.earlham.edu/
binddn="<snip>" bindmethod=simple credentials=<snip>
searchbase="cn=config" type=refreshAndPersist retry="5 5 300
5" timeout=1


Cordialement,


Adrien Futschik



> Hello, I'm trying to do multi-master replication and after following
> the directions in the User Guide I came across the error:
>
> Aug 3 20:21:38 gabbro slapd[81578]: syncrepl_message_to_entry:
> rid=001 mods check (olcDbConfig: value #14 provided more than once)
>
> This is from the logs when it is syncing the cn=config tree. The
> especially odd thing about this error is that olcDbConfig is one of
> the numbered entries (the ones with {#} prepending each value), not to
> mention that the line is question is blank. This isn't the first
> time I've encountered this error when trying to do this type of thing
> (alas, I never got around to trying to fix it before :) ), so I'm
> hoping that means either I'm doing something obviously wrong or
> somebody has seen this before.
>
> Both servers are freebsd jails running FreeBSD 7.2 Stable.
>
> Here are some of the relevant configs. These are not the full entries,
> just the important bits. They are identical on both servers and they
> do sync parts of the config (everything up to the value that fails).
>
> dn: cn=config
> olcServerID: 1 ldap://rock.earlham.edu/
> olcServerID: 2 ldap://gabbro.earlham.edu/
>
> dn: olcDatabase={0}config,cn=config
> olcSyncrepl: {0}rid=001 provider=dap://rock.earlham.edu/
> binddn="<snip>" bindmethod=simple credentials=<snip>
> searchbase="cn=config" type=refreshAndPersist retry="5 5 300
> 5" timeout=1
> olcSyncrepl: {1}rid=002 provider=ldap://gabbro.earlham.edu/
> binddn="<snip>" bindmethod=simple credentials=<snip>
> searchbase="cn=config" type=refreshAndPersist retry="5 5 300
> 5" timeout=1
> olcMirrorMode: TRUE
>
> olcOverlay={0}syncprov,olcDatabase={0}config,cn=config
> objectClass: olcOverlayConfig
> objectClass: olcSyncProvConfig
> olcOverlay: {0}syncprov
>
> olcDatabase={1}bdb,cn=config
> olcDbConfig: {0}# $OpenLDAP: pkg/ldap/servers/slapd/DB_CONFIG,v
> 1.3.2.4 2007/12/18 11:53:27 ghenry Exp $
> olcDbConfig: {1}# Example DB_CONFIG file for use with slapd(8) BDB/HDB
> databases.
> olcDbConfig: {2}#
> olcDbConfig: {3}# See the Oracle Berkeley DB documentation
> olcDbConfig: {4}#
> <http://www.oracle.com/technology/documentation/berkeley-db/db/ref/env/db_c
>onfig.html> olcDbConfig: {5}# for detail description of DB_CONFIG syntax and
> semantics. olcDbConfig: {6}#
> olcDbConfig: {7}# Hints can also be found in the OpenLDAP Software FAQ
> olcDbConfig: {8}# <http://www.openldap.org/faq/index.cgi?file=2>
> olcDbConfig: {9}# in particular:
> olcDbConfig: {10}# <http://www.openldap.org/faq/index.cgi?file=1075>
> olcDbConfig: {11}
> olcDbConfig: {12}# Note: most DB_CONFIG settings will take effect only
> upon rebuilding
> olcDbConfig: {13}# the DB environment.
> olcDbConfig: {14}
> olcDbConfig: {15}# one 1 GB cache
> olcDbConfig: {16}set_cachesize 0 1073741824 1
> olcDbConfig: {17}
> olcDbConfig: {18}# Data Directory
> olcDbConfig: {19}#set_data_dir db
> olcDbConfig: {20}
> olcDbConfig: {21}# Transaction Log settings
> olcDbConfig: {22}set_lg_regionmax 262144
> olcDbConfig: {23}set_lg_bsize 104857600
> olcDbConfig: {24}set_lk_max_locks 100000
> olcDbConfig: {25}#set_lg_dir logs
> olcDbConfig: {26}
> olcDbConfig: {27}# Note: special DB_CONFIG flags are no longer needed
> for "quick"
> olcDbConfig: {28}# slapadd(8) or slapindex(8) access (see their -q option).
>
> Thanks!
>
> Matt Edlefsen
> Earlham College